This is my Print in place - Compliant mechanism using Dial indicator! No supports, no assembly, just print and use!
See how it works, and how it was designed!: https://youtu.be/RFkn6gMkz78
All clearances are 0.3mm/ 0.4mm/ 0.5mm, so most household 3d-printers should have no problems printing it.
-Use 0.2mm layer height or finer!
-Use a 0.4mm Nozzle
Please leave your questions and comments in the comment field, and I’ll do my best to answer them.
Every like is appreciated! :)
7/7/2020-Changed the ender3 dial holder to be in the correct print orientation.
Update! I have now a Partreon, chek it out!
I made an instructables on how to design something like this!