Asteroid Belt | Galaxy Marble Machines

Disclaimer:

Printing results may vary. Slight model imperfections may be present. Have sand paper and hot glue gun ready for worst case scenarios. 

Instructions:

Material: PLA

Layer Height: 0.2-0.28

Supports: No supports needed

Hardware for the Machines:  

DC Motors: https://amzn.to/3pMaxyQ​ 

Metal Rods: https://amzn.to/3pPGGW0​ 

Ball Bearings: https://amzn.to/37DSFQk​ 

Power Adapters: https://amzn.to/2P5ZkfQ​

DC Switch: https://amzn.to/3umNfDf​

USB Cable: https://amzn.to/2OXwpdE​ 

Wire: https://amzn.to/3bxF2DB​

Shrink-wrap: https://amzn.to/3khNB9q​

Soldering Iron: https://amzn.to/37E5s59

IMPORTANT DISCLAIMER: Please note that 3D printing results can vary due to factors such as printer models, slicer settings, and materials used. It is normal for there to be slight variations in prints, even when printing the same model multiple times. With 3D printing, it is to be expected that there may be imperfections, as this is the nature of the printing process. While I make every effort to ensure that my models are compatible with a wide range of 3D printers, it is possible that some prints may not work as intended. However, most issues can be resolved by adjusting slicer settings or re-printing, and in some cases, slight modifications to the printed parts using tools such as sandpaper, hot glue, or a soldering iron may be necessary.