Box With Gears

Box With Gears (STLs)

This is a print-in-place box with six moving gears. You can say it’s essentially a gearbox and it’s printed on its side and uses a technique called bridging to eliminated the need for support material. It is printed with MatterHackers Quantum PLA: https://www.matterhackers.com/store/l/matterhackers-quantum-pla/sk/MS2XWRUN?aff=7595

Print settings:

Layer height: 0.28mm

Print Speed: <80mm/s

Supports: No

***Walls: 3 or 4 (to give the gears axles extra strength)***