Launching Ball Marble Machine

Launching Ball Marble Machine 

Print-in-place ball launcher marble machine. Pull back the lever, release, and send the marble down a twisty-turny track. Includes a secret magnet feature. Insert a magnet to levitate the steel ball on the side of the machine. (Use <10mm diameter magnets) 

Requires: 9.5mm Steel Balls: https://amzn.to/3Nt12A9

(Steel ball and magnet choking hazard. Not for small or unsupervised children)

Print settings: 

- print with 3 wall for extra strength. 

- 10-20% infill

- Lay marble rack on its back to print without supports.

IMPORTANT DISCLAIMER: Please note that 3D printing results can vary due to factors such as printer models, slicer settings, and materials used. It is normal for there to be slight variations in prints, even when printing the same model multiple times. With 3D printing, it is to be expected that there may be imperfections, as this is the nature of the printing process. While I make every effort to ensure that my models are compatible with a wide range of 3D printers, it is possible that some prints may not work as intended. However, most issues can be resolved by adjusting slicer settings or re-printing, and in some cases, slight modifications to the printed parts using tools such as sandpaper, hot glue, or a soldering iron may be necessary.