Launching Ball Marble Machine II
Launching Ball Marble Machine II
This is a very unique launching ball marble machine. While it may not be the most practical, it sure is satisfying.
Print in place with no supports. A good first layer is mandatory for the print to succeed.
Printed with MatterHackers Quantum PLA: https://www.matterhackers.com/store/l/matterhackers-quantum-pla/sk/MS2XWRUN?aff=7595
Uses 9.5mm steel ball bearings: https://amzn.to/3gqOleU
IMPORTANT DISCLAIMER: Please note that 3D printing results can vary due to factors such as printer models, slicer settings, and materials used. It is normal for there to be slight variations in prints, even when printing the same model multiple times. With 3D printing, it is to be expected that there may be imperfections, as this is the nature of the printing process. While I make every effort to ensure that my models are compatible with a wide range of 3D printers, it is possible that some prints may not work as intended. However, most issues can be resolved by adjusting slicer settings or re-printing, and in some cases, slight modifications to the printed parts using tools such as sandpaper, hot glue, or a soldering iron may be necessary.